Siemens SIMTEC70/7x, Bosch M7.6.x/M7.9.7.1/PSG16, Delphi MT35E

This comprehensive multi-module set is a professional solution for Opel and GM vehicles, enabling high-speed FLASH memory reading and writing via the OBD diagnostic port. It covers an extensive range of engine management systems used from 1998 to 2009, supporting both K-Line and CAN bus protocols depending on the specific ECU.
 

Compatibility & Supported Systems:

Siemens SIMTEC Series (Opel)

• SIMTEC 70: Supports Astra G, Vectra B, and Zafira (1998-2000) with X18XE1 and X20XEV engines.

• SIMTEC 71.0/71.1 (K-Line): Supports Astra G, Corsa C, Meriva, Tigra B, Vectra B, Zafira, and Omega B (2001-2009) with Z18XE and Z22XE engines.

• SIMTEC 71.5/71.6 (CAN): Supports Astra H, Vectra C, and Signum (2002-2007) with the Z18XE engine.

• SIMTEC 75.1/75.5 (CAN): Supports Astra H, Vectra C, Signum, and Zafira B (2006-2009) with Z16XER and Z18XER engines.

• SIMTEC 81 (CAN): Supports Astra H, Vectra C, Signum, and Zafira B (2003-2009) with the Z22YH engine.

Bosch Series (Opel, Chevrolet, GM)

• Bosch M7.6.x: Provides full coverage for Agila, Astra G/H, Corsa C/D, Meriva, Tigra B, and Zafira B. Compatible engine codes: Z10XEP, Z12XEP, Z14XEP, Z14XEL, Z20LER, Z20LEH, Z20LEL, Z16LET, and Z16LER.

• Bosch M7.9.7.1: Supports writing for Chevrolet Aveo 1.6L via OBD.

• Bosch PSG16: Supports writing for PSG16 fuel pump control units in GM vehicles via OBD.

Delphi Series (Opel)

• Delphi MT35E: Supports reading and writing for Astra H, Zafira B, Vectra C, Signum, and Meriva (2004-2009) with Z16XEP and Z16XE1 engines.

Key Features:

• Dual Communication: Supports operations via the CombiLoader adapter (K-Line) or J2534-compatible devices (K-Line/CAN).

• Safety: Integrated checksum correction for various Bosch and Siemens units to ensure stable programming.

• Efficiency: Perform firmware updates or tuning without removing the ECU from the vehicle.